UNIMIG WELDERS XA-5022(D)
Finance Estimate
From $8.20*
per week
From 17.80% p.a. #
comparison rate
Interest rate from 7.90% p.a.,
5 year term, 20% deposit.
Get my Online Quote »
* # View disclaimer
* This weekly repayment estimate is provided by Stratton Finance Pty Ltd (ABN 63 070 636 903, Australian Credit
Licence no. 364340) ("Stratton"). Stratton is a finance broker.
This repayment is calculated with an interest rate of 7.90% p.a. over a term of 60 months with a 0% residual / balloon payment. Other residual / balloon amounts are available. The vehicle price shown may not include other additional costs such as stamp duty, government fees and other charges payable in relation to the vehicle.
The comparison rate of 17.80% is based on a secured 5-year loan of $30,000. WARNING: This comparison rate is true only for the examples given and may not include all fees and charges. Different terms, fees or other loan amounts might result in a different comparison rate.
In order to provide this estimate, Stratton are required to make several eligibility assumptions, including full-time employment status and property ownership. To comply with regulations, consideration must be given for credit score and loan to value ratio (LVR), this estimate has been calculated with a credit score of 601 and an LVR of 111%.
This estimate is based on several assumptions outlined above and should be used for information purposes only and is not an offer of finance on particular terms. Credit fees, service fees and charges may apply. Credit to approved applicants only.
A quote, details of all fees and charges may be obtained by contacting Stratton via stratton.com.au or calling 1300 STRATTON (1300 787 288).
This repayment is calculated with an interest rate of 7.90% p.a. over a term of 60 months with a 0% residual / balloon payment. Other residual / balloon amounts are available. The vehicle price shown may not include other additional costs such as stamp duty, government fees and other charges payable in relation to the vehicle.
The comparison rate of 17.80% is based on a secured 5-year loan of $30,000. WARNING: This comparison rate is true only for the examples given and may not include all fees and charges. Different terms, fees or other loan amounts might result in a different comparison rate.
In order to provide this estimate, Stratton are required to make several eligibility assumptions, including full-time employment status and property ownership. To comply with regulations, consideration must be given for credit score and loan to value ratio (LVR), this estimate has been calculated with a credit score of 601 and an LVR of 111%.
This estimate is based on several assumptions outlined above and should be used for information purposes only and is not an offer of finance on particular terms. Credit fees, service fees and charges may apply. Credit to approved applicants only.
A quote, details of all fees and charges may be obtained by contacting Stratton via stratton.com.au or calling 1300 STRATTON (1300 787 288).
Finance Estimate
From $8.20*
per week
From 17.80% p.a. #
comparison rate
Interest rate from 7.90% p.a.,
5 year term, 20% deposit.
Get my Online Quote »
* # View disclaimer
* This weekly repayment estimate is provided by Stratton Finance Pty Ltd (ABN 63 070 636 903, Australian Credit
Licence no. 364340) ("Stratton"). Stratton is a finance broker.
This repayment is calculated with an interest rate of 7.90% p.a. over a term of 60 months with a 0% residual / balloon payment. Other residual / balloon amounts are available. The vehicle price shown may not include other additional costs such as stamp duty, government fees and other charges payable in relation to the vehicle.
The comparison rate of 17.80% is based on a secured 5-year loan of $30,000. WARNING: This comparison rate is true only for the examples given and may not include all fees and charges. Different terms, fees or other loan amounts might result in a different comparison rate.
In order to provide this estimate, Stratton are required to make several eligibility assumptions, including full-time employment status and property ownership. To comply with regulations, consideration must be given for credit score and loan to value ratio (LVR), this estimate has been calculated with a credit score of 601 and an LVR of 111%.
This estimate is based on several assumptions outlined above and should be used for information purposes only and is not an offer of finance on particular terms. Credit fees, service fees and charges may apply. Credit to approved applicants only.
A quote, details of all fees and charges may be obtained by contacting Stratton via stratton.com.au or calling 1300 STRATTON (1300 787 288).
This repayment is calculated with an interest rate of 7.90% p.a. over a term of 60 months with a 0% residual / balloon payment. Other residual / balloon amounts are available. The vehicle price shown may not include other additional costs such as stamp duty, government fees and other charges payable in relation to the vehicle.
The comparison rate of 17.80% is based on a secured 5-year loan of $30,000. WARNING: This comparison rate is true only for the examples given and may not include all fees and charges. Different terms, fees or other loan amounts might result in a different comparison rate.
In order to provide this estimate, Stratton are required to make several eligibility assumptions, including full-time employment status and property ownership. To comply with regulations, consideration must be given for credit score and loan to value ratio (LVR), this estimate has been calculated with a credit score of 601 and an LVR of 111%.
This estimate is based on several assumptions outlined above and should be used for information purposes only and is not an offer of finance on particular terms. Credit fees, service fees and charges may apply. Credit to approved applicants only.
A quote, details of all fees and charges may be obtained by contacting Stratton via stratton.com.au or calling 1300 STRATTON (1300 787 288).
Contact Seller
Features
| Title | UNIMIG WELDERS XA-5022(D) |
| Type | Engineering - Fabrication |
| Sub Type | Welding Equipment |
| Class | Welding Accessories |
| Make | UNIMIG WELDERS |
| Model | XA-5022(D) |
| Sale Price | $990 GST Exclusive |
| Listing Type | New |
| Stock Number | 1133557 |
| RefCode | TA1278613 |
Description
XA-5022(D) Auto Darken Welding Helmet with PAPR Respiratory System - 5-9, 9-13 Shade Suits Mig, Tig,
UNIMIG WELDERS XA-5022(D) Auto Darken Welding Helmet with PAPR Respiratory System - 5-9, 9-13 Shade Suits Mig, Tig, Arc Welding & Grinding Includes Built in Air Purifying Respirator System
CALL NOW AND DO A DEAL! ADD THIS ASSET TO YOUR WORKSHOP
WE OFFER MACHINERY SOLUTIONS AT AFFORDABLE PRICES.
Order Code: W159
POWERED AIR PURIFYING RESPIRATOR
Clean Air Welding
Ultimate Protection from
Harmful Welding Fumes
Auto-Darkening Helmet
The UNIMIG PAPR system provides industrial level protection for the most extreme welding applications and environments where effective and reliable eye and respiratory protection is an absolute must. This is a Powered Air Purifying Respirator system built with a tough robust exterior yet is comfortable and lightweight. The ergonomic design, lightweight shell, fully adjustable head gear & back harness delivers maximum comfort during long welding periods. The quick-disconnect and swivel breathing tube provides easy adjust-ability to accommodate space restraints.
The automatic detecting control system provides constantly stable clean air. The LCD display clearly shows airflow level, battery charge level and filter status. 3 levels of airflow provide increased comfort for varied working conditions and a flashing and audible alarm indicates low battery, low airflow, filter blockage and high battery temperature. The respirator unit is fitted with a spark filter and replaceable pre-filter to protect and extend the life of the main filter. The 12-volt, 4400MAh lithium-ion battery provides for up to 8 hours use on level 1, 6 hours on level 2 and 4 hours on level 3 airflow setting. The battery requires a 3 hour charge at a maximum of 500 charge cycles. A handy, easy to use flow-check meter is provided to ensure the correct airflow is present for maximum protection. Fitted with the advanced UNIMIG XA-5022(D) series helmet featuring the latest digitally-controlled auto darkening filter, adjustable from shade 5-9 and shade 9-13 makes it ideal for MMA, TIG and MIG welding, as well as Plasma Cutting and even grinding applications.
The switching time from light to dark is approximately 0.0001 second. The delay time from dark to light may be adjusted between 0.1 and 0.9 seconds. The UNIMIG XA-5022(D) is a lightweight and comfortable design offering excellent neck coverage and protection. The combination of the UNIMIG PAPR unit and the UNIMIG XA-5022(D) helmet provides you with standards-approved and certified welding protection ensuring the highest levels of welding safety whilst at a highly competitive price.
Features:
Positive pressure system
Designed to work an 8 hour shift
Long lasting reliable P2 filter
Auto shutdown mode
3 airflow levels for varied working conditions
Blocked filter low airflow low battery alarms
Lightweight ergonomic design
Shoulder harness for extended wear
Side or rear mounting of respirator pack
Standards Compliant AS/NZS 1716:2012
Respirator Technical Data
Filter Type P APR-P2
High filter efficiency 99.996%@0.3um
Airflow speed 165L/min 200L/min 230L/min
Standards AS/NZS 1716:2012
Battery Type Rechargeable Li-ION 12V 4400mAh
Battery operating time Level 1: >8h
Level 2: >6h
Level 3: >4h
Charge time 3~4h
Recharge quantity >500
Noise Level >500
System Automatic detecting and controlling system provides constantly stable clean air
Controls Airflow 3 levels
On/Off Switch
Automatic shut down after 30mins of no use
LCD display Airflow level data
Battery life
Filter loading status
Warning & self protection Low battery
Flash & Sound Blocked filter - low air flow
High battery temperature
Operating temperature -05°C - 55°C
Operating humidty level
Specifications:
ORDER CODE: W159
MODEL: XA-5022(D)
Viewing Area (mm): 100 x 83.4
Cartridge Size (mm): 114 x 133
Arc Sensors (No.): 4
Light State: DIN 4
Shade: Dual range 5 - 9, 9 - 13
Shade Control: Internal Digital Control
Power On/off: Button On/OFF
Sensitivity Control: Internal Digital Control
Sensitivity Control: ~
UV/IR Protection: ~
Helmet Power Supply: Solar Cell, Battery Chang
Helmet Power Supply: Required (1 x CR2450
Helmet Power Supply: lithium battery)
Respirator Power Supply: Rechargeable Battery
Respirator Power Supply: Li-ION 12V 4400mAh
Switching Time Light To Dark: 0.08ms / 0.00008 seconds
Delay Time Dark To Light (Seconds) (sec): 0.1 ~ 0.9
Delay Time Dark To Light (Seconds) (sec): ~
TIG Rated Minimum (amp): 5
Grinding Function (Yes / No): YES
Inactive Shade (Grind/Off): ~
Operating Temperature: -05°C - 55°C
Storing Temperature: -10°C - 55°C
Helmet Material: ~
Helmet Material: ~
Total Weight: ~
Application Range: Stick, Mig, Tig, Arc Welding
Application Range: & Grinding
Application Range: ~
Standard: AS/NZS 1337.1:2010
Standard: ~
Standard: ~
Standard: ~
Standard: ~
Standard: ~
To Purchase Online Please Visit The Machineryhouse Website & Search For 'W159'
Visit us in-store at:
Sydney - Unit 1, 2 Windsor Road, Northmead NSW 2152
Melbourne - 4 Abbotts Road, Dandenong South VIC 3175
Brisbane - 625 Boundary Rd, Coopers Plains QLD 4108
Perth - 11 Valentine Street, Kewdale WA 6105
Adelaide - Unit 11/20 Cheltenham Parade, Woodville SA 5011
UNIMIG WELDERS XA-5022(D) Auto Darken Welding Helmet with PAPR Respiratory System - 5-9, 9-13 Shade Suits Mig, Tig, Arc Welding & Grinding Includes Built in Air Purifying Respirator System
CALL NOW AND DO A DEAL! ADD THIS ASSET TO YOUR WORKSHOP
WE OFFER MACHINERY SOLUTIONS AT AFFORDABLE PRICES.
Order Code: W159
POWERED AIR PURIFYING RESPIRATOR
Clean Air Welding
Ultimate Protection from
Harmful Welding Fumes
Auto-Darkening Helmet
The UNIMIG PAPR system provides industrial level protection for the most extreme welding applications and environments where effective and reliable eye and respiratory protection is an absolute must. This is a Powered Air Purifying Respirator system built with a tough robust exterior yet is comfortable and lightweight. The ergonomic design, lightweight shell, fully adjustable head gear & back harness delivers maximum comfort during long welding periods. The quick-disconnect and swivel breathing tube provides easy adjust-ability to accommodate space restraints.
The automatic detecting control system provides constantly stable clean air. The LCD display clearly shows airflow level, battery charge level and filter status. 3 levels of airflow provide increased comfort for varied working conditions and a flashing and audible alarm indicates low battery, low airflow, filter blockage and high battery temperature. The respirator unit is fitted with a spark filter and replaceable pre-filter to protect and extend the life of the main filter. The 12-volt, 4400MAh lithium-ion battery provides for up to 8 hours use on level 1, 6 hours on level 2 and 4 hours on level 3 airflow setting. The battery requires a 3 hour charge at a maximum of 500 charge cycles. A handy, easy to use flow-check meter is provided to ensure the correct airflow is present for maximum protection. Fitted with the advanced UNIMIG XA-5022(D) series helmet featuring the latest digitally-controlled auto darkening filter, adjustable from shade 5-9 and shade 9-13 makes it ideal for MMA, TIG and MIG welding, as well as Plasma Cutting and even grinding applications.
The switching time from light to dark is approximately 0.0001 second. The delay time from dark to light may be adjusted between 0.1 and 0.9 seconds. The UNIMIG XA-5022(D) is a lightweight and comfortable design offering excellent neck coverage and protection. The combination of the UNIMIG PAPR unit and the UNIMIG XA-5022(D) helmet provides you with standards-approved and certified welding protection ensuring the highest levels of welding safety whilst at a highly competitive price.
Features:
Positive pressure system
Designed to work an 8 hour shift
Long lasting reliable P2 filter
Auto shutdown mode
3 airflow levels for varied working conditions
Blocked filter low airflow low battery alarms
Lightweight ergonomic design
Shoulder harness for extended wear
Side or rear mounting of respirator pack
Standards Compliant AS/NZS 1716:2012
Respirator Technical Data
Filter Type P APR-P2
High filter efficiency 99.996%@0.3um
Airflow speed 165L/min 200L/min 230L/min
Standards AS/NZS 1716:2012
Battery Type Rechargeable Li-ION 12V 4400mAh
Battery operating time Level 1: >8h
Level 2: >6h
Level 3: >4h
Charge time 3~4h
Recharge quantity >500
Noise Level >500
System Automatic detecting and controlling system provides constantly stable clean air
Controls Airflow 3 levels
On/Off Switch
Automatic shut down after 30mins of no use
LCD display Airflow level data
Battery life
Filter loading status
Warning & self protection Low battery
Flash & Sound Blocked filter - low air flow
High battery temperature
Operating temperature -05°C - 55°C
Operating humidty level
Specifications:
ORDER CODE: W159
MODEL: XA-5022(D)
Viewing Area (mm): 100 x 83.4
Cartridge Size (mm): 114 x 133
Arc Sensors (No.): 4
Light State: DIN 4
Shade: Dual range 5 - 9, 9 - 13
Shade Control: Internal Digital Control
Power On/off: Button On/OFF
Sensitivity Control: Internal Digital Control
Sensitivity Control: ~
UV/IR Protection: ~
Helmet Power Supply: Solar Cell, Battery Chang
Helmet Power Supply: Required (1 x CR2450
Helmet Power Supply: lithium battery)
Respirator Power Supply: Rechargeable Battery
Respirator Power Supply: Li-ION 12V 4400mAh
Switching Time Light To Dark: 0.08ms / 0.00008 seconds
Delay Time Dark To Light (Seconds) (sec): 0.1 ~ 0.9
Delay Time Dark To Light (Seconds) (sec): ~
TIG Rated Minimum (amp): 5
Grinding Function (Yes / No): YES
Inactive Shade (Grind/Off): ~
Operating Temperature: -05°C - 55°C
Storing Temperature: -10°C - 55°C
Helmet Material: ~
Helmet Material: ~
Total Weight: ~
Application Range: Stick, Mig, Tig, Arc Welding
Application Range: & Grinding
Application Range: ~
Standard: AS/NZS 1337.1:2010
Standard: ~
Standard: ~
Standard: ~
Standard: ~
Standard: ~
To Purchase Online Please Visit The Machineryhouse Website & Search For 'W159'
Visit us in-store at:
Sydney - Unit 1, 2 Windsor Road, Northmead NSW 2152
Melbourne - 4 Abbotts Road, Dandenong South VIC 3175
Brisbane - 625 Boundary Rd, Coopers Plains QLD 4108
Perth - 11 Valentine Street, Kewdale WA 6105
Adelaide - Unit 11/20 Cheltenham Parade, Woodville SA 5011
Related Listings
View MorePremium Ad
4
.jpg)
$4,169
DEMMELER AUSTRALIA ANGLE SET ExpertLine 175, 300, 600 & 800mm
- » Listing Type: Demo
- » Class: Welding Accessories
Unanderra, NSW
Premium Ad
5
$2,475
LINCOLN LINCOLN LN-25
- » Listing Type: Used
- » Class: Welding Accessories
Bibra Lake, WA
Premium Ad
3
$1,980
MILLER MAXSTAR 200DX
- » Listing Type: Used
- » Class: Tig Welder
Bibra Lake, WA
Premium Ad
6
.jpg)
$6,843
DEMMELER WELDING TABLE (1001) Expertline 1000 x 1000 x 850
- » Listing Type: Demo
- » Class: Welding Positioner
Unanderra, NSW
Dealer's Other Listings
View More4
POA
UNIMIG WELDERS RAZOR™ 350 COMPACT
- » Listing Type: New
- » Class: Mig Welder
Stores Australia Wide
1
$78
UNIMIG WELDERS 60328
- » Listing Type: New
- » Class: Welding Accessories
Stores Australia Wide
1
$44
UNIMIG WELDERS 60370
- » Listing Type: New
- » Class: Welding Accessories
Stores Australia Wide
1
$36
UNIMIG WELDERS WZ8
- » Listing Type: New
- » Class: Welding Accessories
Stores Australia Wide